Finally a Heavy Duty Engine Cradle for the Chrysler LA (273 and 318) that will support a full dressed motor minus the bell housing.​​​​​​​
 

The joints slide together with NO slop between them and then bolted with 3/8" grade 5 bolts thru match drilled holes. It is fabricated from heavy 1/8" wall steel tubing, Laser cut parts, MIG welded and Powder Coated with a Tuff Black High Gloss. 

​

Casters:

Standard: 4" rated for 330 lb capacity each. 

Upgrade: 4" rated for 800 lb capacity each (+$80)

​

Engine Hoist Disclaimer:

If you only have standard engine hoist to install your motor on the cradle and need the cradle to fit between the legs of your hoist. I can build your cradle with a 24” front member instead of the standard 28" front member. You must let me know when you request your quote or I will build it with the standard 28"